Windshield wiper motor, still wired up...
...and unwired.
The rubber washers on each side of the three bolts are going to need replacing, methinks.
A shot up underneath, showing part of the arm that is pushed by the motor to move the wiper blades.
Wiper motor detached.
The main wiper arms were easy to remove. At first, removing these last bits had me stymied - the service manual mentioned a special tool to get these bits out. But Ernie (my Merc-lovin' neighbor) said "meh, just use some pliers" - so I did. Suckers came out easy enough. *bonk!*
Suckers came out easy enough. *bonk!*
With those two parts removed, the motor mount and attached hardware came out easily.
No comments:
Post a Comment